In looking at the construction of these buildings, the contractors are not following basic construction rules. Notice, all the 'headers' above doors and windows are not supported with jack studs. They are simply tacked (nailed) to the king stud. Headers are installed on jack studs to properly support the weight above and transfer the weight to the foundation. In this case, the headers and anything above (roof) is supported by nails only. The headers are also single beams vs doubled beams. .Notice the header above the very wide entrance way, there is no supporting studs holding up that header! That headers job is to support the roof above. Anyone with basic framing experience would not do this. Rules may be different in SXM, but this is very shoddy construction and would never pass any inspections in the US.